STENNER PERISTALIC METERING PUMP SYSTEMS
• 3-point roller design assists in anti-siphon protection
• Pump head requires no valves, allows for easy maintenance
• Self-priming against maximum working pressure, foot valve not required
• Pump does not lose prime or vapor lock
• Pumps off-gassing solutions and can run dry
• Output volume is not affected by back pressure
• Injection check valve included with models rated up to
100 psi (6.9 bar)
• Easy to change pump tube; lubrication is not required
• Pump tubes and pump heads interchange between models
• Models (Santoprene® only) tested by Water Quality Association to
conform to ANSI/NSF STD 61
• Adjustable models (Santoprene® only) tested by ETL to conform to
Agency listings vary by model. Contact factory for details. ANSI/NSF STD 50
- OUTPUT CONTROL
- MAXIMUM WORKING PRESSURE
- MAXIMUM OPERATING TEMPERATURE
- MAXIMUM SUCTION LIFT
- MOTOR TYPE
- APPROXIMATE GEAR MOTOR RPM
- DUTY CYCLE
Adjustable models only, external dial ring adjustment from 5%-100% in 2.5% increments
100 psi (6.9 bar) 45MHP2, 45MHP10, 45MHP22, 85MHP5, 85MHP17, 85MHP40
25 psi (1.7 bar) 45M1, 45M2, 45M3, 45M4,
45M5, 85M1, 85M2, 85M3, 85M4, 85M5
125° F (52° C)
25 ft (7.6 m) vertical lift, based on water
1/30 HP, shaded pole, class B
26
Continuous.
