GOULDS LC – Multi-Stage Centrifugal Pump OBSOLETE (Replaced by e-HM)

This product is obsolete, please refer to the Goulds e-HM for current product info

The LC pump is a close coupled end suction to discharge multi-stage centrifugal pump manufactured of 304 stainless steel. A case drain provided as standard. The pumps uses enclosed impellers for greater efficiencies and is positively locked on the shaft with a key and an impeller nut.

The LC is used in residential, and commercial applications and is specifically designed for water circulation, booster services, liquid transfer, spraying systems, general purpose pumping, and jockey pump services.

Download Product Details

GOULDS LC – Multi-Stage Centrifugal Pump OBSOLETE (Replaced by e-HM)

PRODUCT FEATURES

Close coupled, space saving design provides easy installation.
Fabricated 304 stainless steel, end suction top discharge, case drain provided as standard.
Impeller is an enclosed design for higher efficiencies, positively locked on shaft with a key and an impeller nut.
Mechanical seal has carbon/ceramic faces, 316 series stainless steel metal components and Viton elastomer. Optional faces
and elastomers available.

LC NUMBERING SYSTEM
The various versions of the LC are identified by a product code number on the pump label. This number is also the catalog order number for the pump. The meaning of each digit in the product code number is shown below.
GENERAL PUMP DESCRIPTION
Capacities to:95 GPM (21.5 m3/hr)
Heads to: 205 feet (62 meters)
Pipe Connections:

LCA 1 x 1¼ NPT
LCB 1 x 1¼ NPT
LCC 1 x 1½ NPT

Working pressure to: 125 PSI (8 bar)
Maximum temperature to: 220° F (104° C)
Rotation: Right hand/clockwise as viewed from driver’s end.
Motors:
• 2 HP single phase 230/115 V, 60 Hz, ODP
• 3 HP and 5 HP single phase 230 V, 60 Hz, ODP
• 2 HP and 3 HP single phase 208–230 V, 50/60 Hz, TEFC
• 2 HP, 3 HP and 5 HP three phase 208–230/460 V, 50/60 Hz, ODP (5 HP is 60 Hz only)
• 2 HP, 3 HP 208–230/460 V, 50/60 Hz, TEFC
• All motors are 56Y or 48Y frame square flange.

Specs	Pump: Capacities to: 95 GPM (21.5 m3/hr) Heads to: 205 feet (62 meters) Pipe Connections: LCA 1 x 1¼ NPT LCB 1 x 1¼ NPT LCC 1 x 1½ NPT Working pressure to: 125 PSI (8 bar) Maximum temperature to: 220° F (104° C) Rotation: Right hand/clockwise as viewed from driver’s end.
Motors	2 HP single phase 230/115 V, 60 Hz, ODP 3 HP and 5 HP single phase 230 V, 60 Hz, ODP 2 HP and 3 HP single phase 208–230 V, 50/60 Hz, TEFC 2 HP, 3 HP and 5 HP three phase 208–230/460 V, 50/60 Hz, ODP (5 HP is 60 Hz only) 2 HP, 3 HP 208–230/460 V, 50/60 Hz, TEFC All motors are 56Y or 48Y frame square flange. NOTE: For three phase motors and 5 HP single phase, overload protection must be provided in starter unit. Starter and heaters must be ordered separately.

Specs

Pump: Capacities to: 95 GPM (21.5 m3/hr) Heads to: 205 feet (62 meters) Pipe Connections: LCA 1 x 1¼ NPT LCB 1 x 1¼ NPT LCC 1 x 1½ NPT Working pressure to: 125 PSI (8 bar) Maximum temperature to: 220° F (104° C) Rotation: Right hand/clockwise as viewed from driver’s end.

Motors

2 HP single phase 230/115 V, 60 Hz, ODP 3 HP and 5 HP single phase 230 V, 60 Hz, ODP 2 HP and 3 HP single phase 208–230 V, 50/60 Hz, TEFC 2 HP, 3 HP and 5 HP three phase 208–230/460 V, 50/60 Hz, ODP (5 HP is 60 Hz only) 2 HP, 3 HP 208–230/460 V, 50/60 Hz, TEFC All motors are 56Y or 48Y frame square flange. NOTE: For three phase motors and 5 HP single phase, overload protection must be provided in starter unit. Starter and heaters must be ordered separately.