GOULDS 2DW Submersible Dewatering Pump

The Goulds Water Technology 2DW Submersible Dewatering Pumps feature a polyurethane diffuser and impeller for wear and corrosion resistance. The 2DW has an adjustable discharge that can be oriented vertically or horizontally with two screws. Dual mechanical seals for double leakage protection. The pump has a rubber lining that protects against wear around the impeller. The bottom strainer is composed of impact absorbing EPDM rubber with a suction hole allowing for low pump down.
The 2DW pumps are specifically designed to remove water from drainage ditches, trenches, basements, manholes, and excavating drainage in the building trades.

Download Product Details

Submersible Dewatering Pumps

Specifically designed to remove water from:
-Drainage ditches
-Trenches
-Basements
-Manholes
-Excavating drainage in the building trades
-Water Removal from Basements

Features and Benefits

Impeller: Polyurethane for wear and corrosion resistance
Adjustable Discharge: Discharge can be installed for either vertical or horizontal installation using only 2 screws
Diffuser: Polyurethane for wear and corrosion resistance
Mechanical Seal: Dual seals for double leakage protection, outer seal – silicon carbide
Rubber Liner: Protects against wear around impeller
Bottom Strainer: Made of impact absorbing EPDM rubber, suction holes allow for low pump down

Specs	Specifications Pump Discharge size: 2" NPSM threaded hose coupling design, can be rotated Capacities: up to 84 GPM Total heads: up to 51 feet Maximum solids: any particles passing through strainer Mechanical seals: outer seal – silicon carbide, inner seal – carbon ceramic Temperature limit: 95ºF (35º C) maximum Depth of immersion: 16.5 feet (5m) maximum
Motor	Single phase: 3500 RPM, ½ HP and 1 HP, 115 and 230 V, 60 Hz Built-in starter with full overload and temperature protection. Class F insulation. Air filled design. Upper and lower heavy duty ball bearing construction. Power cord: 50 feet.