GOULDS 1GA 2GA

GOULDS 1GA/2GA 1½″ and 2″ and 1GA(X)/2GA(X) Grinder Pumps

The Goulds Water Technology RGS is a residential wastewater grinder pump is capable of grinding sewage in individual residential applications. The RGS has an anti-roping design cutter system, and a silicon bronze, multi-vane semi-open impeller with pump-out vanes for mechanical seal protection. The RGS has a heavy duty cast iron, volute type casing for high efficiency. The motor is fully submerged in a high grade turbine oil-filled chamber for more efficient heat dissipation, permanent lubrication of bearing and mechanical seals, and protection against outside environment. The motor’s shaft is 300 series Stainless Steel with a short overhang for minimum shaft deflection. O-Rings assure positive sealing against contaminants and oil leakage. The power cable is severe duty rated, oil and water resistant, with a epoxy seal on the motor end providing a second moisture barrier in case of outer jacket damage and to prevent oil wicking. Pump ratings are within the motor manufacturer's recommended working limits, can be operated continuously without damage when fully submerged. Maybe used with optional guide rail.

APPLICATIONS High head and pressure sewage systems for: • Municipal • Commercial • Industrial

GOULDS 1GA & 2GA Pump Specs

Download Product Details

GOULDS 1GA & 2GA Pump Curves

Download Product Details

 

SKU: 1GA71G1HD, 1GA71G1LD, 1GA81H1GD, 2GA81H1KD, 2GA31J1FD, 2GA31J1JD, 1GA71H2CD, 1GA71H3CD, 1GA71H4CD, 1GA71H5CD, 1GA81J2BD, 1GA81J3BD, 1GA81J4BD, 1GA81J5BD, 2GA81J2ED, 2GA81J3ED, 2GA81J4ED, 2GA81J5ED, 2GA31K2AD, 2GA31K3AD, 2GA31K4AD, 2GA31K5AD, 2GA31K2DD, 2GA31K3DD, 2GA31K4DD, 2GA31K5DD, 1GA71G1HDX, 1GA71G1LDX, 1GA81H1GDX, 2GA81H1KDX, 2GA31J1FDX, 2GA31J1JDX, 1GA71H2CDX, 1GA71H3CDX, 1GA71H4CDX, 1GA71H5CDX, 1GA81J2BDX, 1GA81J3BDX, 1GA81J4BDX, 1GA81J5BDX, 2GA81J2EDX, 2GA81J3EDX, 2GA81J4EDX, 2GA81J5EDX, 2GA31K2ADX, 2GA31K3ADX, 2GA31K4ADX, 2GA31K5ADX, 2GA31K2DDX, 2GA31K3DDX, 2GA31K4DDX, 2GA31K5DDX Categories: , Tags: ,

GOULDS 1GA/2GA 1½″ and 2″ and 1GA(X)/2GA(X) Grinder Pumps

Features and Benefits

  • Design: Capable of grinding municipal, commercial and industrial sewage.
  • Cutter System: Designed to reduce sewage to a fine slurry.
  • Impeller: Cast iron, semi-open, non-overloading multivane design with pump-out vanes for mechanical seal protection.
  • Casing: Cast iron, volute type for high efficiency.
  • Adaptable for slide rail system.
  • Paint: Two coat paint system for superior surface protection.
  • Float Leakage Sensor (FLS): a small internal float switch is used to detect the presence of water in the stator chamber. Standard on all models.
  • Leakage Sensor Detector Circuit: The FLS, when activated, will cause the patented 24 volt MiniCAS monitoring relay to signal an alarm and, if desired, stop the pump.
  • The MiniCAS 24 volt relay can be ordered separately for installation in a control panel by a UL or CSA certified panel shop or as a built-in option in our control panel.
Specs

Pump Capacities: to 41 GPM Total heads: to 95' TDH Discharge: 1¼” NPT Temperature: 104ºF (40ºC) maximum continuous, 140ºF (60ºC) maximum intermittent Single mechanical seal: silicon carbide rotary/silicon carbide stationary, 300 series stainless steel metal parts, BUNA-N elastomers Fasteners: 300 series stainless steel Rotating cutter and cutter ring: 440 C hardened stainless steel
Motor

Single phase: 2 HP, 60 Hz, 3450 RPM, 208/230 V, capacitor start with on winding thermal protector. No external capacitor kits required. Class F insulation Shaft: 300 series stainless steel threaded design Bearings: ball bearings upper and lower Power Cord with bare lead ends: Use for connections in a control panel or junction box Standard length 20', 14/3 STOW Optional lengths of 30', 50' and 100' Power Cord with 230 V NEMA three prong grounding plug: P suffix equals a 20' long cord with plug PS suffix equals a 30' long cord with plug Allows direct connection to piggyback type float switch

Related products