LAKOS IHB Series Sand Separators offers a durable, reliable automatic purging system to eliminate routine maintenance. Frequency of purging and duration of purging are both programmable to accommodate the specific needs of virtually any application.
– Advanced and patented LAKOS designs offers proven performance with low pressure loss. Removes sand and grit; new exclusive features improve performance to remove 50% more of the finer particles, offering maximum protection.
– Independently tested. Proven superior for today’s demanding filtration requirements.
Installation Instructions:
- LAKOS IHB separators are shipped on a wooden skid with the two support legs detached. Alarge ring, located on the unit’s side, is provided for hoisting as necessary.
- Asuitable foundation is necessary to accommodate the separator’s weight including water(for more questions go to the page 3 in your guide). Tie-down bolts are recommended in the base of the legs. Prior to installation, inspect the inlet, outlet and purge of each unit for foreign objects that may have entered the unit during shipping or storage
- Proper purge hardware is required to flush separated sand from the separator. this equipment should be installed before start-up
- Pipe connections to the inlet and outlet of LAKOS IHB Separator should be a straight run of at least five pipe diameter to minimize turbulence and optimize performance.
Pipe size is not a factor in selecting the proper model of a LAKOS Separator. Rather, all LAKOS Separators operate within a prescribed flow range.