PENTAIR CLEAN & CLEAR PLUS

Cartridge Filters

FIBERGLASS REINFORCED POLYPROPYLENE TANK

Clean & Clear Plus Filters have a corrosion resistant injection molded filter tank featuring superior strength and reliability. The cartridge assembly uses four easy to clean, non-woven, polyester cartridges. Each filter is supplied with a bulkhead union set for easy installation.

SKU: 360310, 160340, 160301, 160332 Categories: , Tags: ,
PENTAIR CLEAN & CLEAR PLUS
FEATURES
  • NSF listed
  • Superior strength
  • Large filter area for increased dirt capacity
  • 1-1/2 in., 100% drain clean-out port
  • Continuous High Flow™ Internal Air Relief*
  • Injection molded tank
  • Balanced hydraulic flow
  • Tension Control™ Clamp
  • 100% factory tested
  • Black bulkhead unions
  • High Flow manual air relief valve

Filter Installation

  • The clena and clear Plus Cartridge Filter should be mounted ona level concrete slab. Position the filter so that instructions, warnings and the pressure gauge are visible to the operator. Italso should be positioned so that the piping connections, control valve, and drain port are convenient and accessible for servicing and winterizing.
  • Be certain to install electrical control(e.g on/off switches, timers. control sustems, etc) at least five(5) feet from the filter. This permits one to stand clear of the filter durin system start up.
  • Allow sufficient space above the filter to remove the filter lid for cleaning and servicing. This distance will vary with the model of filter you are using.
  • Position the filter to safely direct water drainage. Rotate the High Flow Manual Air Relief Valve to safely direct purged air or water. Water discharged from an improperly positioned filter or valve can create an electrical hazard as well as damage property.

Related products