PENTAIR DYNA-PRO
SELF-PRIMING MEDIUM HEAD POOL/SPA PUMPS
A rapid, self-priming, medium head pump in 1/2 through 2 1/2 HP with an extra large, integral hair and lint strainer. Precision-molded with Sta-Rite's exclusive thermoplastic composite resin that is highly corrosion resistant.
FEATURES
- 2-speed Dyna-Pro Self-Priming Medium Head Pump models are now ENERGY STAR® Certified: meets strict energy efficiency criteria set by the U.S. Environmental Protection Agency and the U.S. Department of Energy.
- Superior hydraulic design and optional energy-efficient motor deliver effortless performance, energy savings, and extended pump life.
- High-capacity trap hold a large amount of debris for longer periods between cleanings.
- The Cam and Ramp™ lid is easy to remove and locks in place with a quarter turn, making inspection and cleaning a breeze.
- Quick-disconnect plumbing unions for faster disassembly and easier service.
Instructions:
Read and follow instructions in owner’s manual when installing and operating equipment. Have a trained pool professional perform all pressure tests.
- Do not connect systems to a high pressure or city water systems.
- Use equipment only in a pool or spa installation.
- Trapped air in system can cause explosion. BE SURE all air is out of system before operating or testing
equipment.
Before pressure testing, make the following safety
checks:
- Check all clamps, bolts, lids, and system accessories before testing.
- Release all air in system before testing.
- Water pressure for test must be less than 25 PSI (7.5kg/cm2).
- Water Temperature for test must be less than 100o F.(38o C).
- Limit test to 24 hours. After test, visually check system to be sure it is ready for operation. Remove
trap lid and retighten hand tight only.
NOTICE: These parameters apply to Sta-Rite equipment only. For non-Sta-Rite equipment, consult
manufacturer.
NOTICE: Do not start the pump until the strainer basket cover is on and the tab, or rib, on the discharge port
aligns between the arrow.
