PENTAIR DYNA-WAVE
FEATURES
- Typical Installation – Fountains, ponds, waterfalls.
- Energy Efficient – Provides up to 30 gallons a minute per amp (at 230V).
- Quality Construction – Durable wet-end constructed of Sta-Rite’s industry leading glass reinforced composite resin.
- Multiple Plumbing Options – 2″ Ports include internal NPT threads and external threads for quick-connect unions. Unions available in 1-1/2″ and 2″ slip and NPT. Unions not included.
- Low Maintenance – Extra large trap basket holds more debris, which means less cleaning. The clear polycarbonate lid let’s you see when it’s time to empty the basket impeller lock-ups.
- Quiet – The hydraulically balanced design, combined with a low speed motor make the Dyna-Wave Water Feature Pump the quietest pump of it’s kind in the market.
- Self-Priming – Will prime up to 5′ above water level.
Read and follow instructions in owner’s manual when installing and operating equipment. Have a trained pool professional perform all pressure tests.
- Do not connect system to a high pressure or city water system.
- Use equipment only in a pool or water feature installation.
- Trapped air in system can cause property damage.BE SURE all air is out of system before operating or testing equipment and/or personal injury.
Before pressure testing, make the following safety
checks:
- Check all clamps, bolts, lids, and system accessories
before testing. - Release all air in system before testing.
- Water pressure for test must be less than 25 PSI (7.5 kg/cm2).
- Water Temperature for test must be less than 100° F. (38° C).
- Limit test to 24 hours. After test, visually check system to be sure it is ready for operation. Remove trap lid and retighten hand tight only.
