GOULDS GPGS Goulds Packaged Grinder System
Pump:
- Capacities: to 41 GPM, Total Heads: to 95′ TDH
- Discharge: 1¼” NPT
- Temperature: 104º F continuous, 140º F intermittent.
- Single mechanical seal: silicon carbide rotary/silicon carbide stationary, 300 series stainless steel metal parts, BUNA-N elastomers.
- Rotating cutter and cutter ring: 440 C stainless steel, hardened to 55 – 60 Rockwell C.
Motor:
- Single phase: 2 HP, 60 Hz, 3450 RPM, 208/230V, capacitor start with on winding thermal protector.
- Class F insulation Shaft: 300 series stainless steel threaded design.
- Bearings: ball bearings upper and lower.
- Power cord: 20 feet standard 14/3 STOW.
See BRGS2012 pump bulletin for additional data.
GRINDER PUMP PACKAGES A complete simplex or duplex installation consists of a simplex or duplex pump kit AND a simplex or duplex basin kit.
Choose the simplex or duplex basin kit from the chart on the following pages to best suit your installation needs and make sure it is included in your order.
Both pump/control kit and basin kit must be ordered for a complete installation.
Basin Kits
Simplex
• 24″ diameter fiberglass basin with integral anti flotation
ring.
• Stainless steel hardware.
• Grass green solid fiberglass cover.
• 1.5″ electrical grommet. *
• 4″ inlet grommet. *
• Brass quick disconnect coupling.
• Schedule 40 galvanized steel discharge pipe.
• Cast iron ball type check valve.
• Bronze gate valve.
• 1⁄
4″ stainless steel pump lifting cable
• Pump slide rail system complete with PVC guide pipe and integral stainless steel guide bracket for
those installations requiring a guide rail type system.
Guide Rail Equipped Basin Installation (pump is suspended by its discharge)
Duplex
• 36″ diameter fiberglass basin with integral anti flotation ring.
• Stainless steel hardware.
• Grass green solid fiberglass cover.
• 1.5″ electrical grommet. *
• 4″ inlet grommet. *
• (2) Brass quick disconnect couplings.
• Schedule 40 galvanized steel discharge pipes.
• (2) Cast iron ball type check valves.
• (2) Bronze gate valves.
• (2) ¼” stainless steel pump lifting cables.
• Pump slide rail system complete with dual pipe stainless steel guide rail system assembly for those installations requiring a guide rail type system.
