PENTAIR DYNA-PRO

FEATURES

• 2-speed Dyna-Pro Self-Priming Medium Head Pump models are now ENERGY STAR® Certified: meets strict energy efficiency criteria set by the U.S. Environmental Protection Agency and the U.S. Department of Energy.
• Superior hydraulic design and optional energy-efficient motor deliver effortless performance, energy savings, and extended pump life.
• High-capacity trap hold a large amount of debris for longer periods between cleanings.
• The Cam and Ramp^™ lid is easy to remove and locks in place with a quarter turn, making inspection and cleaning a breeze.
• Quick-disconnect plumbing unions for faster disassembly and easier service.

Instructions:
Read and follow instructions in owner’s manual when installing and operating equipment. Have a trained pool professional perform all pressure tests.

1. Do not connect systems to a high pressure or city water systems.
2. Use equipment only in a pool or spa installation.
3. Trapped air in system can cause explosion. BE SURE all air is out of system before operating or testing
   equipment.

Before pressure testing, make the following safety
checks:

• Check all clamps, bolts, lids, and system accessories before testing.
• Release all air in system before testing.
• Water pressure for test must be less than 25 PSI (7.5kg/cm2).
• Water Temperature for test must be less than 100o F.(38o C).
• Limit test to 24 hours. After test, visually check system to be sure it is ready for operation. Remove
  trap lid and retighten hand tight only.

NOTICE: These parameters apply to Sta-Rite equipment only. For non-Sta-Rite equipment, consult
manufacturer.
NOTICE: Do not start the pump until the strainer basket cover is on and the tab, or rib, on the discharge port
aligns between the arrow.