PENTAIR HI-FLOW

1. Drain and winterize pump and filter per manufacturer’s instructions.
2. Depress valve hadle and rotate so pointer on handle is between any two settings

Replacement of valve top and diverter assembly

1. Set valve handle in any setting.
2. Remove cover screws
3. Lift off value top and diverter assembly
4. Install new valve top and diverter assembly.Be sure arrows on valve top and bottorn are aligned
5. Tighten cover screws evenly and alternately. Do not over tighten

Complete Disassembly

1. Remove handle to diverter screw. Note arrow on top of diverter stem as handle is removed
2. Evenly and alternately loosen cover screws
3. Remove cover screws and valve top
5. Note location of O-ring and spring, and number of washers on diverter stem. Remove O-Ring, spring and washers.
6. Re-assemble in reverse order.
   Note Prior to assembly, be sure bottom gasket and diverter sealing surface are clean and free from nicks to insure positive sealing.
7. When replacing valve handle, be sure arrow on diverter stem and pointer on handle are pointed in the same direction