HAYWARD H-Series Induced Draft Gas Heaters is:
* Available in either natural gas or propaneReduced emissions design provides environment-friendly heating.
* Jet-ported stainless steel burners provide long life and easy maintenance
Cool-to-the-touch cabinet surface temperature ensures worry-free use Convenient On/Off switch to maintain consistent temperature set point.
- Reduced emissions design provides environment friendly heating.
- Revolutionary induced draft technology ensures optimum heating and all-weather performance, even in high wind areas.
- Jet-ported Eugenox burners provide long life and easy maintenance.
- One piece copper header/heat exchanger for leak-free performance.
- Cool-to-the-touch cabinet surface temperatures ensure worry-free use.
- Plug-in 120 volt electric cord for easy installation.
- Small profile and footprint, weighs only 72 lbs.
- Available in natural gas and liquid propane models.
Tips for an easy Installation
Wire Remote Thermostat:
This type of remote has its own temperature sensor for regulating the water temperature. To disable the heater’s thermostat, set the bypass dipswitch to the “on” position. Wire the remote to
terminals 1 & 2 of the terminal block. Do not remove the jumper
clip on terminals 4 & 5. To operate the heater by remote thermostat, the heater’s control
must be in either the “Pool” or “Spa” mode. The heater’s display will show “bO”. The “Pool” or “Spa” LED will be illuminated. The heater will fire when instructed by the remote thermostat.
The heater’s thermostat will function to limit the water temperature to a maximum of 104° F.
Wire Remote Switch:
This type of remote allows for the heater to be remotely turned off or on. The heater uses its internal thermostat to regulate the water temperature. Connect this type of remote to terminals 4 & 5. Remove the jumper clip from 4 & 5. The bypass dip-switch should be kept in the off position.
The heater’s internal thermostat will regulate the water temperature. Whenever the remote switch is off, heater will be disabled and the display will show “LO”.
Technical Specifications
| Model | BTU Input | Gas Type |
|---|---|---|
| H100ID1 | 100,000 | Natural |
