HAYWARD TIGERSHARK SERIES
1. For installation, setup and general operation information refer to the General Operating Instructions (page 5). For selection of the desired cleaning cycle follow steps 2 and 3 below.
2. When the TigerShark QC model is initially switched on, the Quik Clean cycle will automatically be selected. This is indicated by the light on the cycle selection switch located on the power supply. The TigerShark QC pool cleaner will automatically shut-off in 90 minutes.
3. To select the Full Clean cycle, depress the Full Clean button at any time during the Quik Clean cycle. The Full Clean cycle will be indicated by the light on the cycle selection switch. In the Full Clean cycle the unit will automatically shutoff in 4 hours.
If the Quik Clean cycle is complete, the on / off power switch must be turned off and back on, and then the Full cycle can be chosen during the Quik Clean cycle.
Technical Specifications
Model | Cleaner Type | Remote Control | Pool Coverage | Cleaning Cycle | Pool Size |
---|---|---|---|---|---|
RC9950CUB | Robotic | No | Pool floor, walls, coves, waterline | 3 hours | Up to 20′ x 40′ |
RC9955CUB | Robotic | Yes | Pool floor, walls, coves, waterline | 3 hours | Up to 20′ x 40′ |
RC9990CUB | Robotic | No | Pool floor, walls, coves, waterline | 3 hours / 90 minutes Quick Clean | Up to 20′ x 40′ |
Model | Pool Surface | Cord Length | Power Supply Input Voltage | Power Supply Output Voltage | Weight | Warranty |
---|---|---|---|---|---|---|
RC9950CUB | Gunite, Vinyl, Fiberglass, Pebble and Tile* | 55′ | 115 VAC 60 Hz | 24 V DC | 21.5 lbs | 1 year |
RC9955CUB | Gunite, Vinyl, Fiberglass, Pebble and Tile* | 55′ | 115 VAC 60 Hz | 24 V DC | 21.5 lbs | 3 year |
RC9990CUB | Gunite, Vinyl, Fiberglass, Pebble and Tile* | 55′ | 115 VAC 60 Hz | 24 V DC | 21.5 lbs | 3 year |