PENTAIR MEGATHERM

High Performance Electronic Ignition Heaters

Powerful, efficient, and reliable, MegaTherm^® pool heaters are designed for commercial, institutional and large residential pools where economical performance and rapid heat-up are required. Available in indoor and outdoor models in both natural and propane. MegaTherm is design certified to the ANSI^® Z21.56 Standard for Gas-Fired Pool Heaters. (Outdoor 500-1825 units are certifi ed for use without the addition of a draft diverter or external vent. Indoor units incorporate a built-in draft diverter and require only vent piping.) Salt water models (500-1825) are available with cupronickel alloy heat exchanger tubes and bronze headers and header covers.

SKU: MT0500IN09C1PT1C, MT0600IN09C1PC, MT0715IN09C1PC, MT0850IN09C1PC, MT0999IN09C1PC, MT1010IN09C1PC, MT1200IN09C1PC, MT1430IN09C1PC, MT1670IN09CBPC, MT1825IN09CBPC, MT0500IN09C1PN, MT0600IN09C1PN, MT0715IN09C1PN, MT0850IN09C1PN, MT0999IN09C1PN, MT1010IN09C1PN, MT1200IN09C1PN, MT1430IN09C1PN, MT1670IN09CBPN, MT1825IN09CBPN, MT0500EN09CBPC, MT0600EN09CBPC, MT0715EN09CBPC, MT0850EN09CBPC, MT0999EN09CBPC, MT1010EN09CBPC, MT1200EN09CBPC, MT1430EN09CBPC, MT1670EN09CBPC, MT1825EN09CBPC, MT0500EN09CBPN, MT0600EN09CBPN, MT0600EN09CBPN, MT0850EN09CBPN, MT0999EN09CBPN, MT1200EN09CBPN, MT1430EN09CBPN,MT1670EN09CBPN, MT1825EN09CBPN, MT2000IN18CCAC, MT2450IN18CCAC, MT3050IN18CCAC, MT3500IN18CCAC, MT4050IN18CCAC, MT4500IN18CCAC, MT5000IN18CCAC, MT2000IN18CCAN, MT2450IN18CCAN, MT3050IN18CCAN, MT3500IN18CCAN, MT4050IN18CCAN, MT4500IN18CCAN, MT5000IN18CCAN, MT2200EN18CCAC, MT2800EN18CCAC, MT3200EN18CCAC, MT3600EN18CCAC, MT4000EN18CCAC, MT4500EN18CCAC, MT2200EN18CCAN, MT2800EN18CCAN, MT3200EN18CCAN, MT3600EN18CCAN, MT4000EN18CCAN, MT4500EN18CCAN Categories: PENTAIR, Pool Heaters Tag: pool heater

PENTAIR MEGATHERM

Features

Electronic ignition
Built-in draft diverter (indoor models) simplifies installation
Integral pump assures proper water flow (Models 500-1825)
Automatic gas valve
Stainless steel burners, with slide-out burner tray for easy maintenance and long life (Models 500-1825)
High temperature refractory firebox liner to 2000� F for greater efficiency
Easy-to-service header flanges
Corrosion-resistant glass-lined or bronze headers
CSD-1 and other options available. Contact factory for part numbers

Additional Design advantages Include:

Control system includes automatic temperature control, temperature limit, gas pressure regulator, redundant electric gas valve, water flow sensing, electronic flame safety supervision and manual gas shut-off valve. The standard control system operates on 24 VAC with a 120 VAC power supply. Standard units are intermittent (spark) ignition.
Working pressure of 160 psi complies with section IV of the ASME Boiler and Pressure Vessel Code. Units are registered with the National Board of Boiler and Pressure Vessel Inspectors
Pressure relief valve is ASME rated and is selected to provide discharge capacity in excess of unit heating input.
Combustion chamber is cast refractory with a 2000° F (1093°C) working temperature
Burners are atmospheric type constructed of AISI alloy 430(models 500-1825) or AISI 439(models 2000-5000) Stainless steel.
Chassis and jacket parts are of galvanized steel meeting ASTM Standard for G90 coating. Exterior is finished with acrylic paint, thermoset at 325° F(163° C).
Integral flow control valve on models 2000-5000 accepts flows up to 300 GPM