PENTAIR TAGELUS
FEATURES - Special lateral design provides superior flow characteristics and long filter cycles for economical operation
- Maximum Operating Pressure 50 psi
- Combination water and sand drain makes servicing and winterizing fast and easy
- 40, 50, and 60D models standard with plastic clamp
Filter Care
The filter is a very important part of the pool equipment and installation. Proper care and maintenance will add many years of service and enjoyment to the pool. Follow these suggestions for long trouble-free operation:
- To clean the exterior of the filter of dust and dirt, wash with a mild detergent and water then hose off. Do not use solvents.
- If internal maintenance is required, sand may be removed by removing the entire drain spigot from the bottom of the filter and flushing with a garden hose. Pentair Water Pool and Spa’s Sand Vacuum P/N 542090 may also be used
- If, after a number of years, the filter tank appears foggy in color or rough in texture, the tank surface can be painted. We recommend the use of a Quick Dry Spray Enamel.Do Not Paint the VALVE
- The valve clamp used n your Tagelus Sand Filter was manufactured with high quality corrosion resistant materials. The manufacturing process could allow sharp edges to be present on the parts. When working around the clamp, use caution to prevent potential injury to fingers or hands from contact with sharp edges.
- Your filter is a plessure vessel and should never be serviced while under pressure. Always relieve tank pressure and open air bleeder on the Tagelus Valve before attempting to service your filter.
- When restarting your filter, always open the manual air bleeder on the Tagelus Valve and stand clear of the filter
