PENTAIR TRITON II

• Heavy-duty closure provides easy inspection, and features an easy-to-read pressure gauge with air relief valve
• Swing-away diffuser allows instant access to sand and all internal parts
• All internal parts are threaded for ease of service
• Internal air bleed
• Bulkhead connectors are threaded for easy installation and service
• Combination sand and water drain makes servicing and winterizing fast
  and easy
• Maximum Operating Pressure 50 psi

Filter Care
The filter is a very important part of the pool equipment and installation. Proper care and maintenance will add many years of service and enjoyment to the pool. Follow these suggestions for long trouble-free operations:

1. To clean the exterior of the filter of the dust and dirt, wash with a mild detergent and water then hose off. Do not use solvents.
2. If internal maintenance is required, sand may be removed by removing the sand drain from the bottom of the filter and flushing with a garden hose. Pentair Water Pool and Spa, Inc. San Vacuum P/N 542090 may also be used.
3. If after a number of years, the filter tank appears foggy in color or rough in texture, the tank surface can be painted. We recommend the use of a Quick Dry Spray Enamel. Do Not Paint the Valve
4. The filter closure on your Triton Sand Filter was manufactured with high quality corrosion resistant materials.
   This part should be carefully inspected whenever servicing your filter. If excessive leakage is noted coming from the closure/tank interface, the closure and o-ring should be carefully inspected and replaced if any signs of deterioration exist
5. Your filter is a pressure vessel and should never be serviced while under pressure. Always relieve tank pressure and open air bleeder on the filter closure before attempting to service your filter
6. When restarting your filter, always open the manual air bleeder on the filter closure and stand clear of the filter