GOULDS PE Submersible Effluent Pumps

The Goulds Water Technology PE submersible effluent pump is of corrosion resistant construction. The pump has a cast iron body with a thermoplastic impeller and cover. A upper sleeve and lower heavy duty ball bearing construction. The motor is permanently lubricated for extended service life. Powered for continuous operation. All ratings are within the working limits of the motor. Quick disconnect power cord, 20' standard length, heavy duty 16/3 SJTW with 115 or 230 volt grounding plug. The complete unit is heavy duty, portable and compact.

The PE is specially designed for mound systems, effluent/dosing systems, low pressure pipe systems, basement drains, and heavy duty sump/dewatering.

Download Product Details

GOULDS PE Submersible Effluent Pumps counts with a Residential Wastewater treatment as Mound Systems, Effluent/Dosing Systems, Low Pressure Pipe Systems, Basement Draining and also Heavy Duty Sump/Dewatering

Features and Benefits

Corrosion resistant construction
Cast iron body
Thermoplastic impeller and cover
Upper sleeve and lower heavy duty ball bearing construction
Motor is permanently lubricated for extended service life
Powered for continuous operation
All ratings are within the working limits of the motor
Quick disconnect power cord, 20′ standard length, heavy duty 16/3 SJTW with NEMA 5-15P, three prong, 115 volt grounding plug
Complete unit is heavy dury, portable and compact
Mechanical seal is carbon, ceramic, BUNA and stainless steel
Stainless steel fasteners

Specifications
Pump – General:
• Discharge: 11
⁄2″ NPT
• Temperature: 104ºF (40ºC) maximum, continuous
when fully submerged.
• Solids handling: 1
⁄2″ maximum sphere.
• Automatic models include a float switch.
• Manual models available.
• Pumping range: see performance chart or curve.

PE31 Pump:

• Maximum capacity: 53 GPM
• Maximum head: 25’ TDH
PE31 Motor:

• .33 HP, 3000 RPM
• 115 volts
• Shaded pole design
PE41 Pump:

• Maximum capacity: 61 GPM
• Maximum head: 29′ TDH

PE41 Motor:
• .40 HP, 3400 RPM
• 115 and 230 volts
• PSC design

PE51 Pump:

• Maximum capacity: 70 GPM
• Maximum head: 37′ TDH

PE51 Motor:
• .50 HP, 3400 RPM
• 115 and 230 volts
• PSC design

Specs	Pump – General • Discharge: 1½” NPT • Temperature: 104ºF (40ºC) maximum, continuous when fully submerged. • Solids handling: ½” maximum sphere. • Automatic models include a float switch. • Manual models available. • Pumping range: see performance chart or curve. PE31 Pump • Maximum capacity: 53 GPM • Maximum head: 25’ TDH PE41 Pump • Maximum capacity: 61 GPM • Maximum head: 29' TDH PE51 Pump • Maximum capacity: 70 GPM • Maximum head: 37' TDH Motor – General: • Single phase • 60 Hertz • 115 and 230 volts • Built-in thermal overload protection with automatic reset. • Class B insulation • Oil-filled design • High strength carbon steel shaft PE31 Motor • .33 HP, 3000 RPM • 115 volts • Shaded pole design PE41 Motor • .40 HP, 3400 RPM • 115 and 230 volts • PSC design PE51 Motor • .50 HP, 3400 RPM • 115 and 230 volts • PSC design

Specs

Pump – General • Discharge: 1½” NPT • Temperature: 104ºF (40ºC) maximum, continuous when fully submerged. • Solids handling: ½” maximum sphere. • Automatic models include a float switch. • Manual models available. • Pumping range: see performance chart or curve. PE31 Pump • Maximum capacity: 53 GPM • Maximum head: 25’ TDH PE41 Pump • Maximum capacity: 61 GPM • Maximum head: 29' TDH PE51 Pump • Maximum capacity: 70 GPM • Maximum head: 37' TDH Motor – General: • Single phase • 60 Hertz • 115 and 230 volts • Built-in thermal overload protection with automatic reset. • Class B insulation • Oil-filled design • High strength carbon steel shaft PE31 Motor • .33 HP, 3000 RPM • 115 volts • Shaded pole design PE41 Motor • .40 HP, 3400 RPM • 115 and 230 volts • PSC design PE51 Motor • .50 HP, 3400 RPM • 115 and 230 volts • PSC design