GOULDS BF03S Jet Pump

The BFO3S shallow well jet pumps self-adjusting capacity: Automatically adjusts to the water demand within the pump's capacity. This pump is compact and can be easily installed in locations where other larger pumps are difficult to install. It is a self-contained water system, no separate tank required. When pump is primed it never needs priming again even if the water level drops below the end of the suction pipe. It resumes pumping as soon as the water level rises again. Gas or air in the water will not air-bind the pump. Water is retained in the casing so the seal can never run dry. BF03S pumps are easily serviceable; the pump has nozzle clean-out plug which provides easy access to nozzle and diffuser for cleaning, and back pull-out design so pipes do not have to be disturbed. It has an electro-coat paint applied making this pump resistant to corrosion.

The BF03S Pump is specifically designed for small homes, camps, and mobile homes.

Download Product Details

GOULDS BF03S Jet Pump Specifically designed for Small homes, Camps and Mobile homes

FEATURES

Self-Adjusting Capacity: Automatically adjusts to the water demand within the pump’s capacity.
Compact: Can be easily installed in locations where other larger pumps are difficult to install.
Tankless: Self-contained water system, no separate tank required.

Exclusive Air Handling Ability: When pump is primed it never needs priming again even if the water leveldrops below the end of the suction pipe.It resumes pumping as soon as the water level rises again. Gas or air in the water will not air-bind the pump.

Protected Mechanical Seal: Water is retained in the casing so the seal can never run dry.
Easy to Service: Pump has nozzle clean-out plug. Provides easy access to nozzle and diffuser for cleaning. Back pull-out design – pipes do not have to be disturbed.
Powered for Continuous Operation: Pump ratings are within the motor’s working limits, can be operatedcontinuously without damage.
Corrosion Resistant: Electro-coat paint is applied inside and out, then baked on.

GOULDS BF03S Jet Pump SPECIFICATIONS
• Pipe connections:
3⁄4″ suction,
3⁄4″ discharge
• Pressure switch: AS3 (20-40)
MOTOR SPECIFICATIONS
• NEMA standard
• 115/230V, 60 Hz
• Single phase
• 3500 RPM
• Built-in overload with automatic reset.
• Capacitor start type
• Stainless steel shaft
• 1
⁄2 HP – see page 3 ①
SYSTEM COMPONENTS
• Basic Pump Unit: Includes pump, motor, pressure switch, tubing and fittings, air volume control valve, suction check valve, nozzle and diffuser.

Specs	Pump– Pipe connections: 3⁄4" suction and 3⁄4" discharge Pressure switch: AS3 preset at 20-40 PSI
Motor	NEMA standard 115/230V, 60 Hz Single phase 3500 RPM Built-in overload with automatic reset. Capacitor start type Stainless steel shaft SYSTEM COMPONENTS Basic Pump Unit: Includes pump, motor, pressure switch, tubing and fittings, air volume control valve, suction check valve, nozzle and diffuser.